Triumph Adler DCC 2725, Инструкция по эксплуатации

Страница: 316 / 468

Default Setting (System Menu)
8-62 OPERATION GUIDE
Setting the Color Calibration Cycle
After Auto Clear has been activated, or during printing
or while processing Color Registration,
Performing
Color Calibration... Remaining: 50 seconds may be
displayed. While this message is displayed, the
machine makes adjustments to maintain image quality.
Wait until the message disappears.
Set the color calibration cycle here. The setting items
are as follows.
1
Press the System Menu key.
2
Press [ ], [Adjustment/Maintenance], [ ] and
then [Change] of Color Calibration Cycle .
3
Select [Auto], [Short], [Standard] or [Long].
4
Press [OK].
Gray Adjustment
After prolonged use, or from the effects of surrounding temperature or humidity, the hue of printed color output
may shift or color drift may occur. Use this function to correct color settings when the color of a finished copy
does not match the original. Perform color calibration before using gray adjustment (see
page 8-62 ). Use gray
adjustment when the color is not enhanced even after performing color calibration.
Normal and detailed gray adjustment is available. While normal adjustment will almost completely eliminate
errors in color tones, you can also use detailed adjustment for stubborn color tone problems or where more
precise adjustment is needed.
NOTE:
To perform gray adjustment, verify that either 11 × 8 1/2" or A4 paper is loaded into a cassette.
Item Description
Auto Automatically sets the cycle for color
calibration.
Short Sets a short color calibration cycle and
increases the number of times performed,
with priority to image quality.
Standard Sets a standard color calibration cycle,
compromising between image quality and
downtime for processing.
Long Sets a long color calibration cycle and
decreases the number of times performed,
to ensure minimal downtime.