Triumph Adler DCC 2725, Инструкция по эксплуатации

Страница: 103 / 468

Basic Operation
OPERATION GUIDE 3-33
3
For send to folder (FTP)
5
Upon completion of all entries, press [Connection
Test] to check the connection.
NOTE:
Connected. appears when connection to the
destination is correctly established. If Cannot connect.
appears, review the entry.
To specify another destination, go to the step 6. To
specify only one destination, go to step 7.
6
Press [Next Dest.] and repeat steps 3 to 5 to
specify the destination. You can specify a
combined total of up to 10 FTP and SMB
destination folders.
NOTE:
When [Add to Addr Book] is displayed, the
entry is registered in the Address Book.
7
Press [OK] to register the entry in the destination
list.
Item Data to be entered
Max.
characters
Host Name* Host name or IP address of FTP server Up to 64
characters
Path Path to the receiving folder.
For example,
\User\ScanData .
Otherwise the data will be saved in the
home directory.
Up to 128
characters
Login User
Name FTP server log-in user name Up to 64
characters
Login
Password FTP server log-in password Up to 64
characters
* To specify a port number different from the default (21), enter using
the format “host name: port number” (e.g., FTPhostname:140).
To enter the IPv6 address, enclose the address in brackets [ ].
(e.g., [3ae3:9a0:cd05:b1d2:28a:1fc0:a1:10ae]:140)
Status 10/10/2008 10:10
Connection
Test
Host Name
Path
Login
User Name
Login
Password
SMB
FTP
Folder Path Entry
Place original.
Ready to send.
Destination
Cancel OK Next Dest. Add to Addr Book
Specify the folder on the destination
computer.