14
OPERATING THE HANDWASH
To start the handwash unit
Slowly pass your hand in front of the sensor and
the water will begin to flow. The product has a
activation range of 5cm to 15cm. (
fig.16
).
The flow of water is controlled by the
temperature control.
To obtain warm water turn the control slowly
clockwise to the mid position. If the water is
too hot, turn the control slowly anti-clockwise.
If the water is too cool, turn the control slowly
clockwise (
fig.18
).
NOTE
: There will always be a short time delay
between selecting a flow rate and reaching the
stable temperature for that flow rate.
To stop the handwash unit
The unit will time out after 30 seconds.
Alternatively, place hand in front of the sensor to
turn the unit off.
Fig.18
5-15
cm
Activation
Range
Fig.17
WARMER
COOLER
WARNING
DO NOT TOUCH THE LED PROTECTIVE
SHEILDS. REMOVING OR ATERING ITS
POSITION CAN EFFECT THE PRODUCTS
PERFORMANCE.
(fig.19)
.
Open Palm
Back of hand
Fig.16
Present your
hand, Do no
wave
Too fast
Suggested activation gestures
WARNING
DO NOT PRESS THE INFRARED LENS.
IT IS NOT A BUTTON
(fig.17)
.
