12
FITTING THE SWIVEL ARM
Insert the washer into the swivel arm and screw
onto the outlet pipe connection (
fig.11)
.
FITTING THE COVER
To ensure that the temperature control is
correctly positioned on the stabiliser valve,
temporarily place the cover in position so that
the splines engage. Rotate the temperature
control fully anti-clockwise (full cold setting).
Remove the cover and position the temperature
control so that it points at the position
(
fig.12
). Replace the cover squarely to the
backplate and guide into position so that the
control locates correctly into the splined spindle.
Should any difficulty arise, recheck the points
above.
Secure the cover in position with the two
retaining screws at the top and bottom of the
unit.
Fig.12
Fig.11
Fig.13
IMPORTANT
PLEASE ENSURE COVER SCREWS ARE FULLY
TIGHTENED DOWN TO PREVENT WATER
ENTERING THE HANDWASH UNIT.
ONLY THE SUPPLIED SCREWS SHOULD
BE USED
. THE USE OF NON SUPPLIED
SCREWS WILL INVALIDATE PRODUCT
SPECIFICATIONS & GUARANTEE.
Swivel arm
Washer
