5
GB
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting
edges are less likely to bind and are easier to
control.
g. Use the power tool, accessories and tool bits in
accordance with these instructions and in the
manner intended for the particular type of power
tool, taking into account the working conditions
and the work to be performed. Failure to use
the tool for its intended purposes could result
in a hazardous situation and may invalidate the
warranty.
5. SERVICE
a. Have your power tool serviced by a qualified
repair technician, using only identical
replacement parts. This will ensure that the
safety of the power tool is maintained.
NOTE:
The tool must be used only for its prescribed
purpose. Any use other than those mentioned in
this manual will be considered a case of misuse.
The user and not the manufacturer shall be
liable for any damage or injury resulting from
such cases of misuse. To use this tool properly
observe the safety regulations, assembly
instructions and operating instructions, which
can be found in this manual. All persons who
use and service the machine must be informed
about its potential hazards and be acquainted
with this Manual. Children and frail people must
not use this tool. Children should be supervised
at all times if they are in the area in which the
tool is being used. It is also imperative that you
observe the accident prevention regulations in
force in your area. The same applies for general
rules of occupational health and safety. The
manufacturer shall not be liable for any changes
made to the tool nor for any damage resulting
from such changes. Even when the tool is used
as prescribed it is not possible to eliminate all
residual risk factors.
Safety Instructions
