background image

Inclusive Bar Mixer Shower

7

INSTALLATION

PREPARING THE SHOWER

Check the contents to make sure all items are 
present.
Before starting the installaion, make sure all of 
the openings on the valve are carefully covered 
to stop ingress of any debris etc. while routing 
the supply pipework.

The shower valve is suitable for exposed 
installation onto:

 

•  Solid wall
•  Stud partition wall
•  Dry lined wall
•  Laminate cubicle or panel

SITING OF THE SHOWER & ACCESSORIES

Refer to 

fig.7

 for correct siting of the shower. 

The mixer shower should be positioned as 
detailed, with all controls within comfortable 
reach of the user. 
The accessories (shower head, riser rail and/or 
fixed shower head) can be positioned above or 
to either side of the shower.
The shower must be installed in a position that 
allows for easy access for future maintenance and 
commissioning. 

*SUPPLY PIPEWORK

Complete the pipework to the shower area 
having decided on the position of the shower 
and direction of pipe entry, for example rising, 
falling or rear entry.
The hot and cold water pipes should be securely 
attached within the wall or panel to support the 
valve and prevent movement after installation.
Pipe fitting depth should be checked in 
conjunction with the information given in 

fig.8 

- a 

MINIMUM

 of 

7mm of thread MUST be 

available

 once the variable fitting is secured 

into the wall end fitting and the cover trim has 
been fitted. This is to allow the mixer to be fitted 
correctly. Inlet pipe centres should be 150mm 
apart.

*IMPORTANT!

BEFORE FIXING

 the supply pipework within  

the wall, refer to the 

SUPPLY PIPEWORK 

and 

VARIABLE FITTINGS

 sections.  

See 

figures 8, 9 

and

 10

 to ensure  

the 

MINIMUM

 of 

7mm of thread is 

available 

once the cover trims are fitted. 

THIS IS REQUIRED TO ALLOW THE 

CORRECT FITTING OF THE MIXER VALVE.

Shower head can

be mounted 

either side of the

mixer

Height of 

shower head

 to suit user’s 

requirements

*Fig.7

*Diagrammatic view – not to scale.

For illustration purpsoes only.

Содержание ASTI LEVER

























Отзывы: