20
USER OPERATING INSTRUCTIONS
10
check list
SECTION
SECTION
Fig.19
OPERATING THE SHOWER
To start the shower
(fig.19)
• Switch the power on at the isolating switch.
TRITON
will show on the screen
(1)
for a few
seconds and the
Start/Stop
icon
(2)
will
illuminate
.
• Press the
Start/Stop
button
(2)
the screen
will display
Hello
then the showering
temperature.
The shower will always default to
Max
setting.
The
Max
(3)
icon will illuminate.
• During showering, the
Eco
(4), Cold
(5)
or
Max
(3)
icons may be touched to change the
power setting.
• After a new power selection is made, the
appropriate icon is illuminated and the screen
will display
Cold
,
Eco
or
Max
to confirm the
selection before reverting to displaying the
showering temperature.
To stop the shower
• Stop the shower by pressing the
Start/
Stop
button
(2
).
Bye
will flash on the screen
(1)
and water will cease to flow after a few
seconds. (see phased shutdown process
page
22
). The screen will turn itself off.
• After shutdown the unit
MUST
be isolated via
the 45amp-isolating switch.
Cold setting
(5)
• No heater elements are operated.
Eco setting (4)
• Only one heater element is operated.
Max setting
(3)
• All heater elements are operated.
1
2
5
4
3
