Triton 2181629F, Руководство пользователя

Страница: 14 / 24

Push button mixer shower
12
LEAK TESTING
Screw the nut end the of the hose to the bottom
outlet on the mixer shower, making sure that the
sealing washer is in place, and direct it to waste
(fig.19) .
Open the isolating valves to the mixer shower
and check for leaks. Remedy any leaks found.
FITTING THE SHOWER HEAD
Screw the conical end of the hose to the shower
head then locate the shower head into the slider.
Screw the fixed head to the riser/fixed head rail.
Make sure the sealing washer is in place and
screw tight to seal the joint.
IMPORTANT:
This shower is NOT supplied with
a hose retainer. Water Regulations require the
fitting of a double check valve, or similar device,
in the supply pipework to prevent backflow.
Fig.19