Triton Blue SIRIUS 21 LED 3W RGB 3in1 IP65, Руководство пользователя, Страница: 8 / 16

User Manual | S IRIU S 21 LED 3W RGB IP65 Triton Blue | Rev.Jan. 2014 | www.triton -­ blue.com
Control Quick Setup
For detailed instructions on display panel operations and functions please adv ance to the section titled;; “Display Panel Functions”. These
steps assume that you have read and are familiar with setting up a DMX serial data link.
DMX -­ 512 control without “ID” address
The equipment operates on 11 channels of DMX (“STAG” personality). A ddress each fixture in increments of10channels. (l.e. 1,11,21,31,
etc...) To save time you can use the same DMX address for each fixture. All fixtures will then respond simultaneously to cont rol. You may
also group your fixtures and address those groups ali ke for faster programming and control.
1. Access the control panel function by pressing the “MENU” button until the ‘RUN MODE’ is displayed. Press “ENTER” and use t he
“UP/DOWN” buttons to select ‘DMX’ function. Then, Press “MENU” button until ‘DMX512 ADDR ESS’ is displayed. Use the “UP/DOWN”
buttons to increase or decrease channels between 001 and 512. 2. Press the (ENTER) button to confirm action. Then press “MENU ” to
exit. Deactivate ID addressing in each fixture by setting panel function ‘ID ON/OFF’ to O FF. “SET” to “ID ON/OFF” to “OFF”
DMX -­ 512 addressing with ID address
1 . Follow instructions 1 for DMX 512 addressing.
2. Activate ID addressing in each fixture by setting panel function “ID ON/OFF” to ON. “Settings” to “ID ON/OFF” to “ON” For every
DMX512 starting address the user can set 66 separate ID addresses. Set.ID addresses in each fixture by setting panel function“ID
address” to incremental values.(l.e. 1,12,24,36 etc...) “Settings” to “address ” to“ 01 ~ 66 ”
Setting the DMX address
Each fixture requires a start address from 1 to 512. A fixture requiring one or more channels for control begins to read the data on the
channel indicated by the start address. For example, a fixture that occupies or uses 5 channels of DMX and was addressed to start o n
DMX channel 100, would read data from channels: 100, 101, 102, 103,and 105. Choose start addresses so that the channels used do not
overlap and note the start address selected for future reference. The equipment uses up to11channels of DMX. lf this is yo ur first time
using DMX, we recommend reading the DMX Primer in the Appendix Section.
Control Panel Functions
All fixture functions and settings are accessible via the built -­ in control panel interface.