Triton Blue SIRIUS 21 LED 3W RGB 3in1 IP65, Руководство пользователя, Страница: 5 / 16

User Manual | S IRIU S 21 LED 3W RGB IP65 Triton Blue | Rev.Jan. 2014 | www.triton -­ blue.com
designed for power linking from one TS104 to another TS104 fixture. Each fixture ships with IP -­ 65 proprietary power input cables. Each
fixture ships with a power adapter to Male Edison connector.
All fixtures must be connected to circuits with a suitable Earth Ground.
Depending on the application, the lighting fixture may require a different connector
Please refer to the below wire color code if installing a new connector.
Wire Connection Pin
Brown AC Live 1
Blue AC Neutral 2
Green/ Yellow AC Ground 3
Mounting
This fixture may be mounted in any safe position.
The fixture includes a mounting yoke to which a rigging clamp can be attached. You must supply your own clamp and make sure t he
clamp is capable of supporting the weight of thi s fixture. lt is recommended to use at least 2 mounting points per fixture. You can order “C”
and “O” -­ clamps.
Note: There are 2 types of applications for this fixture: floor stand for up lighting, and overhead use for down lighting. lf you a re using this
f ixture for up lighting, then you must use at least 1 safety cable/chain for each fixture in addition to the mounting brackets.
1 . lf hanging the fixture for over head use, then please follow the below steps.
2. Block access below the work area and use su itable and stable platform when installing or servicing fixture.
3 . Ssfety cables must always be used, secured through safety cable attachment. The safety cable must be capable of holding 10 times
the weight of the fixture.
4. Verify the structure can ho ld 10 times the weight of all to -­ be install ed fixtures. After prolonged periods of operation, the fixture chassis
may reach high temperatures. This fixture must be mounted in a ventilated location, as it is convection cooled.
Fixture Linking
You will n eed a serial data link to run light shows of one or more fixtures using a DMX -­ 512 controller to run synchronized shows on two or
more fixt ures set to a master/slave oper ating mode, The combined number of channels required by all the fixtures on a serial da ta link
determines the number of fixtures the data link can support.
lmportant: Fixtures on a serial data link must be daisy chained in one single line. To comply with the EIA -­ 485 standard no more than 32
devices should be connected on one data link . Conn ecting more than 32 fixtures on one serial data link without the use of a DMX
optically -­ isolated splitter may result in deterioration of the digital DMX signal. Maximum recommended serial data link distance: 500
meters (1640 ft.) Maximum recommended number of fixtures on a serial data link : 32 fixtures