Triton Blue SIRIUS 21 LED 3W RGB 3in1 IP65, Руководство пользователя, Страница: 7 / 16

User Manual | S IRIU S 21 LED 3W RGB IP65 Triton Blue | Rev.Jan. 2014 | www.triton -­ blue.com
Setting up a DMX Serial Data Link
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin
connector of the controller.
2. Connect the end of the cable coming from the controller which will have a (female) 3 pin connector to the input connector of thenext
fixture consisti ng of a (male) 3 pin connector.
3. Then, proceed to connect from the output as stated above to the input of the following fixture and so on.
Master/Slave Fixture Linking
1. Connect the (male) 3 pin connector side of the DMX cable to the output (female) 3 pin connector of the first fixture.
2. Connect the end of the cable coming from the first fixture which will have a (female) 3 pin connector to the input connector of the next
fixture consisting of a (male) 3 pin connector. Then, proceed to connect from t he output as stated above to the input of the following fixture
and so on.
4 . OPERATING INSTRUCTIONS
Control Options
The equipment is addressable in the DMX range of 001 to 512. ln its simplest control form, this allows for the control of up to 56 fixt ures in
the11 -­ channel “STAG” personality;; however, a secondary “ID” address system exists for use in a limited DMX universe and architectu ral
environments. The “ID” address system allows the user to assign up to 66 fixtures within the same DMX address;; in effect, multiplying the
control of the equipment within a single universe to 3,696 fixtures. The equipment “ID” address system is accessed using DMX channel
11 [STAG]. Consideration must be placed when programming live performances or cues that need to trigger on demand or on a time line.
So, to remain within one second execution time, program no greater than 10 fixtures on ID addressing per DMX channel.