TriStar Power AirFryer Pro CM002, Руководство пользователя

Страница: 9 / 20

Rotisserie Spit Assembly
Placing Rotisserie Spit or
Rotating Mesh Basket into Unit
1. Insert the left side of the assembled Spit or Basket first
into the Rotisserie Shaft socket. Be sure the Rotisserie
Shaft is in place to engage rotation (FIG. E).
2. Place the right side onto the hanger (FIG. F).
FINAL ASSEMBLY
FIG. C – LEFT SIDE FIG. D – RIGHT SIDE
FIG. F – RIGHT SIDE
IMPORTANT: See the Final Assembly diagram (page 8) to help identify
the left and right sides of the Rotisserie Shaft before placing it in
the Unit. The right side has two notches, and the left has one.
1. Insert each Skewer point through holes on the left
Skewer Rack (FIG. C).
2. Squeeze the clip end of each Skewer as you insert
into the opposite Skewer Rack slot to secure.
3. Release clip to securely rest in slot as shown
(FIG. D).
4.
Repeat steps 3–6 in a uniform manner around
the Skewer Rack. Make sure Skewers are evenly
spaced.
5. Ensure the Skewer Racks are inside the
indentations on the Shaft, tighten the Set Screws
and ensure they are securely in place.
6. Use caution while inserting the Shaft into the Unit.
The Skewer ends are sharp and can poke you.
Removing Rotisserie Spit
or Rotating Basket from Unit
1. Open Unit door to pause cooking cycle or turn Unit off by
pressing the Power Button.
2. Insert Rotisserie Fetch Tool beneath the Rotisserie Shaft.
3. Using the Rotisserie Fetch Tool, lift the right side of the
Shaft at a slight angle to clear the bracket. Then, shift to
the right until the left side of the shaft slides out of the
Rotisserie Shaft socket.
4.
Carefully remove the rotisserie food from the oven.
5. Place food on a plate, cutting board, or the Rotisserie
Stand to remove food from the Shaft, Spit, or Basket.
Power AirFryer Pro™ | Model: CM002
9
Using the Accessories
FIG. E – LEFT SIDE