4
Installation
Notes:
• HDD/SSD drives are sensitive to static electricity
and must be handled properly so as not to risk
data loss. Always handle your HDD/SSD drive with
caution by wearing an anti-static strap (Such as
Tripp Lite P999-000) when transporting it, or by
touching a grounded metal surface to discharge
yourself of static electricity prior to picking up the
drive.
• When disconnecting the connected drive, be sure
to go through the proper disconnection steps
of your operating system to safely disconnect.
Removing the drive prior to proper disconnection
can result in loss or corruption of data stored on
the drive.
1.
Using the included screwdriver, remove the
2 drive tray screws located on both sides of
the USB port.
2.
Remove the front plate and slide out the
internal drive tray.
3.
Place your SSD next to the M.2 SSD
connector, matching up the drive mounting
holes. Position the included nut underneath
a drive mounting hole that matches the
length of your SSD.
16-12-187-93369E.indb 4
1/23/2017 9:49:23 AM