Tripp Lite SRWO12UHD, Руководство пользователя

Страница: 5 / 20

5
Step
1
Using one of the mounting rail tie plates and four of the M5 x 10mm Phillips head
screws, connect one set of shorter and longer vertical mounting rails. Repeat this
step for the other set of rails.
Step
2
Insert one end of the combined vertical mounting rails into the corners of the bottom
panel frame (both panel frames can be used as a top or a bottom) opposite the
mounting side and secure them with 2 of the M5 x 10mm Phillips head screws on
each side.
Step
3
Insert the other end of the combined vertical mounting rails into the corners of the
top panel frame opposite the mounting side and secure them with 2 of the M5 x
10mm Phillips head screws on each side.
Step
4
Attach the right-side and left-side support straps by securing 8 of the M6 x 12
Phillips head screws to the sides of the top panel frame and vertical mounting rails.
Step
5
Before mounting the rack, find the studs in your wall/mounting surface and make
all measurements, and or guide marks in accordance with the configuration you
have chosen (22U).
Installation/Wall-Mounting
continued
22U Configuration
Step
6
Using user-supplied hardware, mount the top and bottom panel frames to the wall.
Both mounting frames can accommodate 5/16” lag bolts.
Note: Mount this configuration with the longer rails towards the bottom.
2
3
4
1
6
16”
(406.4 mm)
40.25”
(1022.3 mm)