A
1
2
2
3
2
3
2
4
4
4
4
5
5
Sealing the Rear Doors of the Enclosure
Install the included Tubular and Flat Door Seals and Magnetic Vinyl Sheets to the rear doors of the rack enclosure. This is necessary
to ensure proper air flow through the front of the enclosure and up the chimney. Remove all rubber grommets and bumpers before
installing the Door Seals and the Magnetic Vinyl Sheets.
Cut the Door Seals into the sections required for your rack. The following table gives the location (by number) and recommended
measurement for each section.
Cut
Number Required
Length (mm) for 42U Rack Length (mm) for 45U Rack Length (mm) for 48U Rack
1
2
544
544
544
2
4
178
178
178
3
2
1334
1469
1604
4
4
95
95
95
5*
1
1740
1872
2007
*Use Flat Door Seal
Install the Tubular and Flat Door Seals as shown
A
. The inserts depict the seal installation in cross section:
Installation
continued
DOOR HINGE
201204262-93-2958-EN.indd 5
6/4/2012 2:39:54 PM
