4
Installation
3 - Static IP Address Assignment/Terminal Menu
Configuration Settings
3-1
Determine IP Information:
The SRCOOLNETLX can support a single static IPv4
address (this requires setting the IP address, subnet mask and gateway) and/or
a single static IPv6 address. In addition, the SRCOOLNETLX can support a single
static IPv4 or an IPv6 DNS address that is required to be entered.
3-2
Configure Terminal Emulation Program:
If you have not already done so,
download the serial over USB driver (TL-cdc) from the Tripp Lite website. The
driver can be found by going to www.tripplite.com/support and typing
SRCOOLNETLX in the search field. To install the driver, follow the instructions
provided. Once the driver is installed and a COM port has been assigned, set
your terminal emulation program to use the COM port that corresponds to the
USB port.
18-08-472-93387D.indb 4
8/30/2018 10:12:00 AM
