8
Basic Operation
continued
Telephone/Network Protection Jacks:
These jacks protect your
equipment against surges over a telephone/network data line.
Connecting your equipment to these jacks is optional. Your UPS will
work properly without this connection.
Not compatible with PoE (Power Over Ethernet) applications.
Accessory Slot:
Remove the small cover panel from this slot to install
optional accessories to remotely monitor and control your UPS. Refer to
your accessory’s manual for installation instructions. Visit www.tripplite.
com for more information, including a list of available SNMP, networking
management and connectivity products.
Fan:
The fan cools the UPS's internal components. It operates only
when the UPS is in battery backup mode, is charging its batteries or is
carrying a heavy electrical load.
Input Breaker:
Protect your electrical equipment from overcurrent draw
from the UPS load. If this breaker trips, remove some of the load, then
reset it by pressing the breaker in.
12-11-101 93-2442.indb 8
12/4/2012 10:52:43 AM
