background image

17

storage

Before storing your UPS, turn it completely OFF. If you store your UPS for an extended period of time, recharge the UPS batteries for 4 to 6 
hours once every three months. Note: after you connect the UPS to utility power, it will automatically begin charging its batteries. If you leave 
your UPS batteries discharged for an extended period of time, they will suffer a permanent loss of capacity.

service

Your SmartOnline UPS is covered by a 2-year limited warranty. A variety of Extended Warranty and On-Site Service Programs are also available 
from Tripp Lite. For more information on service, call Tripp Lite Customer Support at (773) 869-1234.

Before returning your UPS for service, follow these steps:
1. Review the installation and operation instructions in this manual to ensure that the service problem does not originate from a misreading of 
the instructions. 
2. If the problem continues, do not contact or return the UPS to the dealer. Instead, call Tripp Lite at (773) 869-1233. A service technician will 
ask for the UPS's model number, serial number and purchase date and will attempt to correct the problem over the phone.
3.  If  the  problem  requires  service,  the  technician  will  issue  you  a  Returned  Material Authorization  (RMA)  number,  which  is  required  for 
service. They will also discuss proper packaging and shipping procedures. Any damages (direct, indirect, special, incidental or consequential) 
to the UPS incurred during shipment to Tripp Lite or an authorized Tripp Lite service center is not covered under warranty. UPS Systems 
shipped to Tripp Lite or an authorized Tripp Lite service center must have transportation charges prepaid. Mark the RMA number on the 
outside of the package. If the UPS System is within the 2-year warranty period, enclose a copy of your sales receipt. Return the UPS for service 
using an insured carrier to the address given to you by the Tripp Lite service technician.

Tripp Lite has a policy of continuous improvement. Specifications are subject to change without notice.

FCC radio/tV interference notice:

Note: This equipment has been tested and found to comply with the limits for a Class A digital 

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 

protection  against  harmful  interference  when  operated  in  a  commercial  environment.  This 

equipment generates, uses and can radiate radio frequency energy, and if not installed and 

used  in  accordance  with  the  instruction  manual,  may  cause  interference  to  radio 

communications. Operation of this equipment is likely to cause harmful interference in which 

case the user will be required to correct the interference at their own expense. The user must 

use shielded cables and connectors with this product. Any changes or modifications to this 

product not expressly approved by the party responsible for compliance could void the user's 

authority to operate the equipment.
Made in China.

regulatory Compliance  

identification numbers

For  the  purpose  of  regulatory  compliance  certifications  and  identification,  your  Tripp  Lite 

product has been assigned a unique series number. The series number can be found on the 

product nameplate label, along with all required approval markings and information. When 

requesting compliance information for this product, always refer to the series number. The 

series  number  should  not  be  confused  with  the  marking  name  or  model  number  of  the 

product.

Warranty

2-year LiMiteD Warranty

Seller warrants this product, if used in accordance with all applicable instructions, to be free from original defects in material and workmanship for a period of 2 years (except internal UPS system 

batteries outside USA and Canada, 1 year) from the date of initial purchase. If the product should prove defective in material or workmanship within that period, Seller will repair or replace the 

product, in its sole discretion. Service under this Warranty can only be obtained by your delivering or shipping the product (with all shipping or delivery charges prepaid) to: Tripp Lite; 1111 W. 

35th Street; Chicago IL 60609; USA. Seller will pay return shipping charges. Call Tripp Lite Customer Service at (773) 869-1234 before sending any equipment back for repair. 
THIS WARRANTY DOES NOT APPLY TO NORMAL WEAR OR TO DAMAGE RESULTING FROM ACCIDENT, MISUSE, ABUSE OR NEGLECT. SELLER MAKES NO EXPRESS WARRANTIES 

OTHER  THAN  THE  WARRANTY  EXPRESSLY  SET  FORTH  HEREIN.  EXCEPT  TO  THE  EXTENT  PROHIBITED  BY APPLICABLE  LAW, ALL  IMPLIED  WARRANTIES,  INCLUDING ALL 

WARRANTIES OF MERCHANTABILITY OR FITNESS, ARE LIMITED IN DURATION TO THE WARRANTY PERIOD SET FORTH ABOVE; AND THIS WARRANTY EXPRESSLY EXCLUDES 

ALL INCIDENTAL AND CONSEQUENTIAL DAMAGES. (Some states do not allow limitations on how long an implied warranty lasts, and some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may have other rights which vary from 

jurisdiction to jurisdiction). 
Tripp Lite; 1111 W. 35th Street; Chicago IL 60609; USA 
WARNING: The individual user should take care to determine prior to use whether this device is suitable, adequate or safe for the use intended. Since individual applications are subject to great 

variation, the manufacturer makes no representation or warranty as to the suitability or fitness of these devices for any specific application.

Visit www.tripplite.com/warranty today to register the warranty for your new Tripp Lite product. You'll be automatically entered into a drawing 
for a chance to win a FREE Tripp Lite product!*

* No purchase necessary. Void where prohibited. Some restrictions apply. See website for details.

Warranty registration

1111 W. 35th Street, Chicago, IL 60609 USA

(773) 869-1234

200811036 93-2676_EN

Содержание SmartOnline SU16000RT4U


















Отзывы: