7
1
3
2
S1
S1
S1
S1
A4
A4
A6
S5
S2
A4
A5
4-4 Mounting (Tower)
Warning: When mounting the UPS system in a tower position, make sure the control panel is closer to the top of the cabinet than the
bottom.
Note: The control panel can be rotated to match the UPS system’s position. Pull the panel out slightly, rotate it and push it back into place.
Tower Mounting Procedure
1
Use M4 flat-head screws
S2
to attach covers
A5
to four of the tower feet
A4
.
2
Use M3 flat-head screws
S1
to attach the tower feet
A4
to the UPS power module and external battery pack as shown.
3
With the aid of an assistant, place the cabinets in an upright position. Use M3 pan-head screws
S5
to attach the stabilizing bracket
A6
to the
cabinets.
4 – Mounting
continued
