10
Specifications
Model:
APSX700HF
AC Input Connection:
IEC 60320 C14
AC Output Connection:
IEC 60320 C13
Battery Connection:
Hardwire
Inverter
Continuous Output Capacity (@ 20° C)
700W/700VA
Peak Output Capacity (Instantaneous)
1400W
DC Input Volts (Nominal)
12 V DC
DC Input Voltage Range
10-15 V DC
Minimum DC Fuse Rating
125 A
DC Input Current @ Nominal V DC Full Load:
72 A
Battery Charger
Input:
230 V, 50 Hz AC
Charging Capacity DC:
6 A
Line VAC Operation
Total Input AC Current (Continuous, Charger at Maximum): 4.5 A
Maximum Output Current (Continuous):
3 A
Note on Labeling
Two symbols are used on the APS labels.
V~
: AC Voltage : DC Voltage
Battery Wiring
For maximum efficiency, keep battery wires as short as possible. For very short runs, 6 AWG
(4.115 mm) wiring may be adequate; for longer runs, 4 AWG (5.189 mm) or 2 AWG (6.544 mm)
wiring is recommended.
Note: Acceptable power is directly dependent on wire length, i.e. the shorter the wiring, the better the
performance. Total wiring length is the sum of the positive and negative wiring lengths.
200705102 93-2678 APSX700HF OM.qxd 8/30/2007 12:34 PM Page 10
