manualshive.com logo in svg

Tripp Lite NetDirector B064-016-02-IPG, Руководство пользователя

Поделиться
Скачать
Tripp Lite NetDirector B064-016-02-IPG Скачать руководство пользователя страница 5

1

4

5

6

2

3

5

Introduction 

(continued)

Supported Browsers

Components

Supported browsers for users that remotely log into the B064-Series 
KVM Switches include:

Browser

Version

Internet Explorer*

6 and higher

Firefox

1.5 and higher

Mozilla

1.7 and higher

Safari

2.0 and higher

Opera

9.0 and higher

Netscape

8.1 and higher

* Internet Explorer 64-bit is not supported, only 32-bit.

Front View

No . Component

Description

1

Power LED

Illuminates when the KVM switch is powered on

2

Port LEDs

Port LEDs will illuminate in colors corresponding to the status of the port:

Green

 – Illuminate green when the corresponding port is connected and powered-on

Red

 – Illuminate red when the corresponding port is selected as having the KVM’s focus, but is either not 

connected to a computer/server or is connected to a computer/server that is not powered-on

Orange

 – Illuminate orange when the corresponding port is connected, powered-on and selected as having the 

KVM’s focus

Note: The Port LEDs are steady under normal conditions, but will flash at half second intervals when the 
corresponding port is being accessed under Auto Scan Mode or Skip Mode.

3

LAN LEDs

The Primary (Link 1) and Secondary (Link 2) LAN LEDs will illuminate in colors corresponding to the 
network transfer rate:

Red

 – Illuminate red at speeds of 10 Mbps

Orange

 – Illuminate orange at speeds of 100 Mbps

Green

 – Illuminate green at speeds of 1000 Mbps

4

USB Ports

Note: Only computers connected to the KVM by a B055-001-USB-V2 can access the KVMs Virtual Media 
functionality

. Additional USB ports support external keyboard and mouse, as well as virtual media functionality. 

5

Reset Switch

Note: This recessed switch must be pushed with a thin object, such as the end of a paper clip or a ballpoint pen.

•  Pressing and releasing the Reset Button when the KVM switch is running performs a system reset.
•  Pressing and holding the Reset Button in for more than three seconds when the KVM switch is running resets 

the switch configuration to the factory default settings. Note: This does not clear User Account information.

•  Pressing and holding the Reset Button in while powering on the switch will restore the KVM switch to its 

original firmware in the event of a firmware upgrade failure. Note: This operation should only be performed 
in the event of a firmware upgrade failure that results in the device becoming inoperable.

6

Port Switching Buttons

•  Press the 

Port Down

 button to switch from the current port to the previous port on the installation.

•  Press the 

Port Up

 button to switch from the current port to the next port on the installation.

Note: The figure shows the front panel of a B064-032-04-IPG. The B064-032-02-IPG, B064-016-02-IPG and B064-016-04-IPG contain all the 
same front-panel features as the B064-032-04-IPG, except the B064-016-04-IPG and B064-016-02-IPG come with 16 ports instead of 32.

Содержание NetDirector B064-016-02-IPG


















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды