22
8. Basic Operation
8.4 Powering Off and Restarting the KVM
If it becomes necessary to power off a KVM switch, do the following before restarting it:
1. Unplug the KVM from its power source.
2. Shut down all computers that are attached to it.
Note:
Unplug the power cords of any computers that have the Keyboard Power On function. Otherwise, the KVM will continue to
receive power from the computers.
3. Wait 10 seconds, then plug the KVM back into its power source.
4. Power on the computers.
Note:
If there are stations cascaded down from the primary KVM, all the cascaded stations and the computers attached to them
must be shut down as well.
