Tripp Lite B092-016, Руководство пользователя, Страница: 58 / 242

58
To add a new network connected Managed Device:

The Administrator adds a new network connected Managed Device using Add Host on the
Serial&Network: Network Host menu. This automatically creates a corresponding new
Managed Device (as covered in Section 4.4 - Network Hosts).
 When adding a new network connected RPC or UPS power device, set up a Network Host,
designate it as RPC or UPS, then go to
RPC Connections (or UPS Connections ) to configure the
relevant connection. Again the corresponding new Managed Device (with the same Name
/Description as the RPC/UPS Host) is not created until this connection step is completed (refer
Chapter8 - Power and Environment).
Note
The outlet names on this newly created PDU will by default be “Outlet 1” “Outlet 2”. When you
connect a particular Managed Device (that draws power from the outlet), the outlet will then take
up the name of the powered Managed Device.
To add a new serially connected Managed Device:

Configure the serial port using the Serial&Network: Serial Port menu (refer Section 4.1 -
Configure Serial Port ).

Select Serial&Network: Managed Devices and click Add Device .

Enter a Device Name and Description for the Managed Device.

Click Add Connection and select Serial and the Port that connects to the Managed Device.

To add a UPS/RPC power connection or network connection or another serial connection click
Add Connection.

Click Apply.
Note
To set up a new serially connected RPC UPS or EMD device, configure the serial port, designate
it as a Device then enter a Name and Description for that device in the
Serial & Network: RPC
Connections (or UPS Connections or Environmental ). When applied, this will automatically
create a corresponding new Managed Device with the same Name /Description as the RPC/UPS
Host (refer
Chapter8 - Power and Environment).