Tripp Lite B092-016, Руководство пользователя, Страница: 137 / 242

137

Check NSCA Enabled , choose an NSCA Encryption Method and enter and confirm an NSCA
Secret . Remember these details as you will need them later on. For NSCA Interval , enter 5.

Click Apply .
Next, configure the attached Window network host and specify the services you will be checking with
Nagios (HTTP and HTTPS):

Select Network Hosts from the Serial & Network menu and click Add Host .

Enter the IP Address/DNS Name of the network server, (e.g.: 192.168.1.10) and enter a
Description , (e.g.: Windows 2003 IIS Server).

Remove all Permitted Services . This server will be accessible using Terminal Services, so check
TCP , Port 3389 and log level 1 and click Add . It is important to remove and re-add the service to
enable logging.

Scroll down to Nagios Settings and check Enable Nagios.

Click New Check and select Check Ping . Click check-host-alive.
 Click New Check and select Check Permitted TCP . Select Port 3389.

Click New Check and select Check TCP . Select Port 80.

Click New Check and select Check TCP . Select Port 443.

Click Apply.
Similarly, configure the serial port to the router to be monitored by Nagios:

Select Serial Port from the Serial & Network menu.

Locate the serial port that has the router console port attached and click Edit.
 Ensure the serial port settings under Common Settings are correct and match the attached
router’s console port.

Click Console Server Mode and select Logging Level 1.

Check Telnet (SSH access is not required, as SDT Connector is used to secure the otherwise
unsecured Telnet connection).

Scroll down to Nagios Settings and check Enable Nagios.

Check Port Log and Serial Status.