6
Installation
Static IP Address Assignment /
Terminal Menu Configuration Settings
4-1
Determine IP Information:
The Network Interface can support a single static IPv4
address (requires setting the IP address, subnet mask and gateway) and/or a single static
IPv6 address. In addition, the Network Interface can support a single static IPv4 or an IPv6
DNS address that is required to be entered.
4-2
Configure Terminal Emulation Program:
Set your terminal emulation program to use
the COM port with its corresponding USB port.
4-3
Select Option 3: IPv4 setting, or Option 4: IPv6 settings. Select Option 1: Method. Select
Option 2: Static.
Assign the address, subnet mask, gateway, etc. Save your settings by selecting "
A
" (apply).
Choose “
y
” to restart PowerAlert now. Close your terminal session.
4-4
Remove Cable:
Remove the cable and proceed to the
Test Network Connection
section.
21-03-416-933666.indb 6
21-03-416-933666.indb 6
4/7/2021 12:21:29 PM
4/7/2021 12:21:29 PM
