92
On the SDT Settings menu, select
SDT Mode
(which will enable port forwarding and SSH
tunneling) and enter a
Username
and
User Password.
Note
When you enable SDT, this will override all other Configuration protocols on that port
Note
If you leave the
Username
and
User Password
fields blank, they default to
portXX
and
portXX
where XX is the serial port number. So the default username and password for Secure RDP over
Port 2 is
port02
Ensure the Console Server
Common Settings
(Baud Rate, Flow Control) are the same as were set
up on the Windows computer COM port and click
Apply
RDP and VNC forwarding over serial ports is enabled on a Port basis. You can add Users who can
have access to these ports (or reconfigure User profiles) by selecting
Serial & Network :User &
Groups
menu tag - as described earlier in Chapter 4
Configuring Serial Ports
6.10.3 Set up SDT Connector to SSH port forward over the Console Server Serial Port
In the
SDT Connector
software running on your remote computer, specify the gateway IP address of
your Console Server and a username/password for a user you have setup on the Console Server that has
access to the desired port.
Next, add a New SDT Host. In the Host address you need to put portxx where xx = the port to which you
are connecting. Example, for port 3 you would have a Host Address of: port03 and then select the RDP
Service check box.
Содержание 93-2879
Страница 59: ...59...
