65
configure access to network-connected Hosts that the user is authorized to access
and set up (for each of these Hosts) the services (e.g. HTTPS, IPMI2.0) and the
related IP ports being redirected
configure access to the Console Server itself (this is shown as a
Local Services
host)
configure access with the enabled services for the serial port devices connected to
the Console Server
Note
The Retrieve Hosts function will auto-configure all classes of user (i.e. they can be members of
user
or
admin
or some other group or no group). SDT Connector will, however, not auto-
configure the
root
(and it is recommended that this account is only used for initial config and for
adding an initial
admin
account to the Console Server)
6.2.4
Make an SDT connection through the gateway to a host
Simply
point
at the host to be accessed
and click
on the service to be used in accessing that
host. The SSH tunnel to the gateway is then automatically established, the appropriate ports
redirected through to the host, and the appropriate local client application is launched pointing
at the local endpoint of the redirection:
Содержание 93-2879
Страница 59: ...59...
