UPS battery set ships fully assembled and ready for installation, no time consuming connection of internal batteries by user is necessary
Mounting hardware included for 4 post rackmount enclosures, 2 post telecom rack compatible with separate purchase 2POSTRMKITWM,
compatible with upright tower installation with included hardware
Specifications
OUTPUT
Output Volt Amp Capacity
(VA)
1500
Output kVA capacity (kVA)
1.5
Output Watt Capacity
(watts)
1000
Output kW capacity
1
Output power factor
0.7
Nominal Output Voltage(s)
Supported
120V
Frequency compatibility
60 Hz
Output voltage regulation
(line mode)
-18%, +8%
Output voltage regulation
(Battery mode)
+/- 5%
Built-in UPS output
receptacles
8 5-15R outlet(s)
Built-in controllable
switched load banks
Three switchable two-outlet 5-15R load banks
Output AC waveform (AC
mode)
Sine wave
Output AC waveform
(battery mode)
Pure Sine wave
INPUT
Rated input current (at
maximum load)
10.1A
Nominal Input Voltage(s)
Supported
120V AC
UPS input connection type
5-15P
Input circuit breaker
15A
UPS Input cord length (ft.)
10
UPS Input cord length (m)
3
Recommended Electrical
Service
15A 120V
BATTERY
Full load runtime (minutes)
7.5 min. (1000w)
Half load runtime (minutes)
21 min. (500w)
Expandable battery runtime
Extended runtime supported via optional external battery packs
