8
21.
Place the customer display cable in the
notch, and route the cable through to the
cable organizer at the bottom of the base
unit.
22.
Key the pins of the touchscreen into the
slots on the base unit and slide the
touchscreen back into place. You will hear a
‘click’ when the unit is fully seated.
23.
Make sure the customer display cable is
properly routed through the notch and all
four pins are properly seated in their
corresponding slots on the base unit.
24.
Connect the customer display cable to the
‘COM1’ port.
25.
For all devices that will be connected to the
touchscreen (except the customer display),
route their cables through the oval opening
in the metal stand of the touchscreen.
