7
15.
In this example, an optional customer
display will be connected to ‘COM1’. The
device is then mounted on the rear of the
touchscreen with two screws.
16.
Locate the touchscreen release button on
the top rear of of the base.
17.
Position one hand underneath the
touchscreen. Press the release button with
your other hand.
18.
Lift the touchscreen up and away from the
base.
19.
Note the touchscreen is connected to the
base unit by four pins that key into
corresponding slots on the base unit.
20.
Locate the customer display cable notch on
the top of the base unit.
