Triple S Ace 20BA, Инструкция

Страница: 10 / 38

Page 10 of 38
MACHINE OPERATION
8) SCRUBBING
This machine is equipped with brush assist
propulsion. Depress the handle switch lever.
The scrub brushes will begin to rotate and
solution will begin to flow. During the first few
yards of operation, check that the quantity of the
cleaning solution is sufficient to wet the floor and
that the squeegee dries the floor surface.
WARNING! Always lift the squeegee when
moving backwards.
9) OVER FILL PROTECTION
The machine is equipped with a float that stops
the vacuum exhaust air flow when the recovery
tank is full. Vacuum motor does not stop
operating but the vacuum exhaust air flow rate is
greatly reduced. When this occurs, empty the
recovery tank by removing the drain plug on the
drain hose and then empty the recovery tank.
WARNING! Use gloves for protection
from contact with dangerous solutions.
Handle Switch
Lever
Drain Plug
Float