TTrig
//
Quick Guide
2
D04-05Aen201908 Quick Guide TTrig
TriOS Mess- und Datentechnik GmbH · Bürgermeister-Brötje-Str. 25 · D-26180 Rastede · Germany
Phone: +49 (0) 4402 69670 - 0 · Fax: +49 (0) 4402 69670 - 20 · [email protected] · www.trios.de
Short Guide
Compatibility
The TTrig can only be used with one sensor and one wiper at the same time and can only be used for sensors with integrated
data logger (OPUS, NICO).
Scope of Delivery
TTrig
Connections
Cable
bushing
M8
connection
M12
connection
Control panel
2 rotary encoders for setting measurement interval and delay
5 buttons with the following functions:
•
Start automatic measurement*
•
Service (switch on sensor permanently for data download)
•
Sensor single measurement
•
Wiper activation
•
Reset (reset program)
*If the red power fail LED flashes, this button can be pressed to start a manual attempt to restore normal operation.
LEDs
Description
Colour
Function
Behaviour
Start
white
Measurement interval active
LED flashes briefly once every 20 seconds
white
Sensor initialisation
LED flashes continuously
Wiper
white
Wiper active
LED lights up permanently
Sensor
white
Sensor active
LED lights up permanently 2 minutes before measu-
rement
LED flashes three times briefly during measurement
LED lights up permanently 1 minute after measure-
ment
Service
yellow
Service active
LED lights up permanently
yellow
Sensor initialisation failed
LED flashes briefly once every 20 seconds
Power fail
red
Critical power supply (<11 V)
LED flashes briefly once every 20 seconds
