This is a 5 way 3.5mm pitch connector. The
connector is used both to provide the 24 Volt
power to the MC508 and provide connections
for I/O expansion via Trio’s CAN I/O expanders.
A 24V dc, Class 2 transformer or power source
must be provided as this powers the unit.
This 24 Volt input is fully isolated.
The 24V (V+) and 0V (V-) MUST be connected
as they power the MC508). The MC508 is
grounded via the metal chassis. Fit a short
shield connection between the chassis earth
screw and the earthed metal mounting panel
/ plate. The CAN connections are optional.
See the Technical Reference Manual
for important power connection EMC
information.
5-WAY
CONNECTOR
A standard Ethernet connector is provided for use as
the primary programming interface.
The Trio programming software, Motion Perfect, must
be installed on a Windows based PC that is fi tted with
an Ethernet connection. The IP address is displayed on
the MC508 display for a few seconds after power-up or
when an Ethernet cable is plugged in.
Ethernet cable must be CAT 5 or better.
RJ45
CONNECTOR
V+
CAN_H
SHIELD
CAN_L
V-
