Page 37
E Series Ethernet Radio – User Manual
Version 08-10
EH45e Quick Start Guide
Introduction
Welcome to the Quick Start Guide for the EH45e Hot Standby
Base / Repeater Station. This section provides additional step-by-
step instructions to install, commission and operate the EH45e
Hot Standby Base Station. This document should be read in
conjunction with the EB45e Base Station Quick Start Guide.
The EH45e is a fully redundant, hot standby digital Ethernet radio
base / repeater station providing automatic changeover facilities.
The EH45e is designed as a modular solution, comprising 2
identical EB45e base station units (standard) linked to a central,
fail-safe monitoring and changeover controller (Hot Standby
Controller). Either base station may be taken out for maintenance
without the need for any system down time. The automatic
changeover is triggered by out of tolerance (alarm) conditions
based on either RF and/or user data throughput parameters.
Part E – Getting Started - EH450
Features and Benefits
•
Individual and identical base stations with separate control
logic changeover panel
•
Modules are hot swapable without user downtime
•
Flexible antenna options – single, separate Tx & Rx, two Tx
and two Rx
•
Both on-line and off-line units monitored regardless of active
status
•
Also refer to the common Features and Benefits list of the E
Series Data Radio
Base / Repeater Unit
Hot Standby Controller Unit
Base / Repeater Unit
Note: HSC RF connectors not used on ETSI version
Rear View
