XPERT-PRO – Operational Manual
TRINITY
[16]
2. Press
key again. Immediately ‘P’ starts blinking which shows that the
parameter can now be selected. Select the K1 ON by pressing
and
keys according to your desired parameter and then press
key to save the
parameter.
3. Press
key to retrieve the next programmable parameter, K1 VALUE and
then set as above parameter for the following display.
4. After setting K1 VALUE, press
key to retrieve the next programmable
parameter, K1 TIME and then set as above parameter for the following
display.
5. To retrieve to the next desired parameter, K2 ON, press
key so as to set
as before. Or else,
key for about five seconds to return into Run Mode.
Setting K2 On, K2 Value and K2 Time for an Alarm Parameter
To set K2 ON, K2 VALUE and K2 TIME, proceed as before K1 ON, K1 VALUE and
K1 TIME.
Auto scrolling the Run Mode pages
Scroll second is settable from 5 to 12 seconds. The unit will either continue to display
the parameter steadily or scroll automatically. If the SCROLL SECOND is set to
Zero, the unit will be in FREEZE mode, and will not scroll automatically.
In case, the scroll seconds value is set from 5 to 12 seconds, the unit will
automatically scroll to the next pages in Run Mode for every specified second.
To scroll the Run Mode pages, precede the following instruction.
1. In Run Mode, press
key for about five seconds and then the unit displays
the first programmable parameter, DEMAND ON. Press
key several times
K1 TIME
45
K1 VALUE
2500
K1 ON
KVA
