Trinabess PowerCube 2.0 DC, Руководство по установке

Страница: 37 / 45

37
System Initialization
– Start-up
Note: Please double check the connections (notably AC & DC) before operation.
Power on the BESS system per the following steps:
1. After changing all the setting. Restart the system by turning off all AC & DC circuit breakers
(no particular order)
2. Turn ON PV array isolators/circuit breakers (if applicable)
3. Turn ON AC circuit breaker between Power Box Grid port & Grid. The Power Box should start
to operate now.
4. Turn ON all the battery packs by pressing any one of the red softstart button on the pack
5. Turn ON DC circuit breaker/isolator between PowerCube 2.0 & Power Box (Only when you
see inverter LCD screen shows
“Wait”
which indicate success start-up)
6. Turn ON some home appliances or load
. Make sure power consumption in the Power Box’s
phase is greater than 200W.
7. You should be able to read the data on the screen .