Trinabess PowerCube 2.0 DC, Руководство по установке

Страница: 13 / 45

13
Installation Accessories
Depending on the site-specific situation and local electrical compliance requirements, some if not all of
the following parts will be required:
•
AC circuit breakers
– Minimum
four 32A circuit breaker is required next to the BESS system and
inside the main switchboard. Additional ones for extended distance away from
switchboard/distribution board
• AC cables (≥4mm
2
)
– From powerbox to Switchboard/Distribution board & critical loads
• DC cables (≥25mm
2
)
– From powercube to powerbox (2 to 5 metres)
•
Ethernet/CAT5 cables
– To extend the
communication cable , distance between the powercube
and the powerbox. Or to extend the Energy meter communication cables .
•
Conduits
– 20mm