Trilliant SkyPilot Gateway Pro, Установка и настройка

Страница: 34 / 62

26 | Chapter 4 Configuring the SkyPilot Gateway Pro
Configuring Adjacent SkyPilot Gateway Pros
is quite tricky....
5
For new SkyPilot Gateway
Pros, complete the
installation and power it
on. SkyGateway/SkyExtender Installation and
Setup
6
(Optional) Log in to the
SkyPilot Gateway Pro and
configure the
management VLAN. ”The SkyPilot EMS Interface” in SkyPilot
Network Administration
7
Provision the SkyPilot
Extender(s). The following automatic provisioning
topics in
SkyPilot Network Administration :

“Provisioning a Device”

“Starting SkyProvision”

“SkyProvision Display Pane”

”Searching for Configured Devices”
8
For DualBands, provision
the access point(s). For information about access point
settings, refer to
SkyPilot Network
Administration . For configuration
procedures, refer to the SkyPilot Web
Interface Reference
9
For new SkyPilot
Extenders, install the
device and power it on. SkyGateway/SkyExtender Installation and
Setup
10
Provision the SkyPilot
Connector(s).

Same as for step
7
.
11
For new SkyPilot
Connectors, install the
device and power it on. The appropriate installation manual:

SkyConnector Indoor Installation

SkyConnector Outdoor Installation
Table 4-3. Automatically Provisioning All Network Devices (Page 2 of 2)
Step Refer to