Trilliant SkyPilot Gateway Pro, Установка и настройка

Страница: 32 / 62

24 | Chapter 4 Configuring the SkyPilot Gateway Pro
4
Connect a computer to
the device and access the
command-line interface
or the Web interface.
(For DualBands, this step
refers to the SkyPilot
Extender portion of the
device.)
The appropriate interface reference
manual:

SkyPilot Command-Line Interface
Reference

SkyPilot Web Interface Reference
5
Provision the device.
(For DualBands, this step
refers to the SkyPilot
Extender portion of the
device.)
Either of the following provisioning tool
references, making sure to set at least the
minimum provisioning parameters (refer
to “Required Provisioning Parameters”
and in
SkyPilot Network Administration ):

SkyPilot Command-Line Interface
Reference

SkyPilot Web Interface Reference
6
For DualBands, reboot the
device, connect a
computer to the device’s
2.4 GHz access point, and
provision the access point. SkyPilot Web Interface Reference
7
Power off the device.
8
Complete the installation. The appropriate installation manual:

SkyGateway/SkyExtender Installation
and Setup

SkyConnector Indoor Installation

SkyConnector Outdoor Installation
9 Power on the device.
Table 4-2. Manually Provisioning a Device (Page 2 of 2)
Step Refer to