RES-3000-Focus
PA-0129A Rev. 1.0
June 18, 2010
Page 2 of 4
RES-3000-FocusAX
Procedure
1. If it is not already done, dis-assemble
the Focus meter clear cover and
unsnap the base from the top portion
of the case to access the 3 post
receptacle holes in the Top Portion
and the Focus/FocusAX board
connector as shown.
2. Snap the 3 plastic spacers into the
Trilliant SecureMesh RES-3000-
Focus/FocusAX PCB as showm.
3. Install the SecureMesh board by first
inserting the female connector in the
Focus/FocusAX male connector as
shown. The 3 spacers will be aligned with
the 3 holes in Focus/FocusAX meter Top
Portion.
Meter TOP
portion
Post
receptacles
Plastic
spacers
Male-Female
connector mating
Female
connector
Male Interface
connector
HE-0033C
Short Spacer
HE-0033D
HE-0033D
Be careful to not damage
components and or PCB
traces when inserting spacers.
Do not apply excessive stress
on the PC board. Bending the
board too much would damage
components.
