SecureMesh
TM
Gateway
Installation Guide
Trilliant Incorporated
page 19 of 23
Optional Wi-Fi Antenna Installation
If the Gateway has an optional Wi-Fi radio, observe the following procedures:
Attaching the Optional Wi-Fi Antennas
•
Attach both 2.4 GHz Wi-Fi antenna to the N-type
female connectors as shown in to the right.
•
Hand tighten or, equivalently, tighten the antennas
using a torque-limiting tool tighten it to 14 inch-pounds
(1.5 Newton-meters), where 14 inch-pounds is
approximately the torque a person can achieve using
one hand.
•
Use self-fusing rubber insulation and sealing tape to
wrap the antenna bulkhead connector and the
antennas to avoid water penetration of any kind.