Trilithic Seeker D, Руководство по эксплуатации

Страница: 54 / 70

Seeker D User’s Guide
Document Num., Rev. 4 May 2018 Page 54
To synchronize the data between the Seeker MCA III and the
Seeker D, press and hold the
SNAPSHOT
button until SYNC
appears. While the Seeker MCA III is transferring data to the
Seeker D, the screen shown in the image to the right will be
displayed.
Data Synchronization with Seeker MCA III (Optional)
If you do not have a network connection for LAW uploads when using the Seeker D with
the Seeker MCA III, the data recorded in the Seeker MCA III can be synchronized with the
internal memory of the Seeker D for later upload through a PC.
When the Seeker MCA III is done transferring data to the Seeker
D, the screen shown in the image to the right will be displayed.
Press any button to return to the RF Signal Measurement display.
Syncronization Progress
Synchronization Done
Data synchronization will only work when the Seeker D is in
the Mobile Mount. The SNAPSHOT button is used to record
leakage information recorded by the Seeker D when it is not in
the Mobile Mount.
The bar graph will show the progress of the data
synchronization, do not remove the Seeker D from the Mobile
Mount until the data synchronization is completed, otherwise
data corruption will occur.