Trilithic Model One Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 76

background image

TWO YEAR WARRANTY

Trilithic, Inc. warrants that each part of this prod-
uct will be free from defects in materials and
workmanship, under normal use, operating con-
ditions and service for a period of two (2) years
from date of delivery. Trilithic, Inc.’s obligation
under this Warranty shall be limited, at Trilithic,
Inc.’s sole option, to replacing the product, or to
replacing or repairing any defective part, F.O.B.
Indianapolis, Indiana; provided that the Buyer
shall give Trilithic, Inc. written notice.

Batteries are not included or covered by this
Warranty.

The remedy set forth herein shall be the only
remedy available to the Buyer under this War-
ranty and in no event shall Trilithic, Inc. be li-
able for incidental or consequential damages
for any alleged breach of this Warranty. This
Warranty shall not apply to any part of the prod-
uct which, without fault of Trilithic, Inc., has been
subject to alteration, failure caused by a part
not supplied by Trilithic, Inc., accident, fire or
other casualty, negligence or misuse, or to any
cause whatsoever other than as a result of a
defect.

Except for the warranty and exclusions set forth
above, and the warranties, if any, available to
the Buyer from those who supply Trilithic, Inc.,
there are no warranties, expressed or implied
(including without limitation, any implied warran-
ties of merchantability of fitness), with respect
to the condition of the product or its suitability
for any use intended for it by the Buyer or by
the purchaser from the Buyer.

!

TRILITHIC

9202 E. 33rd Street
Indianapolis, IN 46235

«
1
2
3
4
5
...
»

Содержание Model One













































































Отзывы:

Нет отзывов

Похожие инструкции для Model One

Бренд: Kawai Страницы: 2

Бренд: Datron Страницы: 197

Бренд: Panasonic Страницы: 72

KW9M Eco-Power Meter

Бренд: Panasonic Страницы: 2

Бренд: Keithley Страницы: 48

Бренд: DAKOTA ULTRASONICS Страницы: 25

Бренд: DAKOTA ULTRASONICS Страницы: 36

Бренд: Weller Страницы: 9

Бренд: Oceanic Страницы: 68

Бренд: Oceanic Страницы: 24

Бренд: Hanna Instruments Страницы: 28

DGX Gears XTRA Regulator

Бренд: Dive Gear Express Страницы: 26

Бренд: RS PRO Страницы: 41

Бренд: QuantAsylum Страницы: 35

Бренд: Hammond Страницы: 36

Бренд: SIMET Страницы: 2

Бренд: YATO Страницы: 52

Бренд: Heyl Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды