Trikke EV Owner’s Manual - V3 11/10/10 -
page 10
11
22
UNLOCK
LOCK
Unfolding the Frame
In front of each arm there is a folding mechanism with a knob that
must be pulled and twisted to keep the lock open to allow the
folding process. Position the vehicle so that it is standing on its
rear wheels to access and operate the folding levers. Once
unlocked, put the vehicle on the ground and lift the front column.
Twist the knobs back to release the folding mechanism, allowing
Ÿ
Turn the key counterclockwise to OFF position. Push the key in and turn
counterclockwise again to unlock the battery (
for 36V with fairing only:
remove the key
before pulling up the battery). Pull the battery up by the handle the entire extension of
the rail until it’s free.
Ÿ
Be careful to not drop the battery on the ground during installation and removal.
Ÿ
Battery can remain either installed to the Tribred or removed for charging.
Removing the Battery
them to lock in place (frame mounted). You should hear two clicks indicating the locking of
each arm.
Folding the
Frame
UNLOCK
LOCK