Trikdis T16 Series, Руководство по установке

Страница: 19 / 21

www.trikdis.com 19 May, 2019
RF transmitter T16
Terminal Description
If the zone is violated when the alarm system is armed, counting of entry time begins. If the
alarm system is not disarmed during this time, an output OUT1 signal will be formed and a
message will be sent.
IN2 (IN3,
IN4, IN5,
IN6)
2 (3, 4, 5, 6) input terminal, selectable type: NC, NO, EOL (2,2 kΩ). (default setting NO).
Instant zone. If the zone is violated when the alarm system is armed,
an output OUT1 signal
will be formed and a message will be sent immediately.
OUT1 Output terminal, open collector type, current up to 1 A. For connecting a siren.
Blinking LED indicators on the TM17 inform about activated inputs during the time the system is armed.
When the alarm is disarmed (by holding a key to the reader), the indicators do not stop blinking. To stop
the indicators from blinking, hold the key to the reader again.
LED indication of operation of the TM17 reader.
Indicator State Description
1 (2, 3, 4, 5, 6) Off Zone not triggered
Red solid Zone triggered
Red blinking Triggered zone caused security system to trigger
State
Green solid Security alarm area is disarmed
Green blinking Exit time is being counted down
Red solid Security alarm area is armed
Red blinking Entry time is being counted down
Trouble
Off No operational problems
9 red blinks Problem with the connection to RS485 module
3.5 “Options” window