Trikdis T16 Series, Руководство по установке

Страница: 14 / 21

www.trikdis.com 14 May, 2019
RF transmitter T16
After the Read [F4] button is clicked, the program will read and show settings currently saved on the T16 .
With TrikdisConfig , set the required parameters using the following program window descriptions.
3.2 “Main” window
Settings group “Main settings”

Administrator access code – grants full access to the transmitter’s configuration. The code can be up
to 6 symbols long and is made up of numbers or Latin characters. (Default code - 1234).

Installer access code – grants limited access to the transmitter’s configuration (factory code - 1234).

Security panel model – specify the type of the security control panel that the transmitter will be
connected to.
Settings group “Radio frequency 1”

Enabled – tick the box to turn on the transmitter’s radio channel.

RF protocol – specify the radio protocol that will be used (RAS-2M, RAS-3, LARS, LARS1, LARS_RAS2M,
LARS1_RAS2M).

Account ID – enter the user’s identification number for the internal and panel events sent by the
transmitter.

Group – enter the partial user identification ID (used only with the LARS RF protocol).

Use security panel account – tick the box and the control panel’s events will be sent with the security
control panel’s ID. Not all panels allow to use the identification number.

System – radio network system number. Used for assigning objects (users) to groups in a radio
network.

RF name/frequency – the name of the radio channel frequency, can be described in the window
Options > Available radio frequencies .

RF power – choose transmitter power (1-5 W).

Event transmit – enter how many times to repeat event transmissions (1-10 times). (Recommended
to leave default settings).