User Manual v151003
Multichannel receiver RM14
12
D.
List of receiver events. Disabling generation of event messages (tab
Events
).
Upon occurance of an event listed in the window above, a message will be formed and sent to the
monitoring software. Reporting of unwanted events can be turned off by ticking off the check box.
Configuration of a receiver allows to change: Event code, Partition’s number and zone. For some of
the messages the output channel identification is set automatically. For detailed list and conditions for
generating an event messages refer to chapter X. Receiver event messages.
E.
Controlling communication with GPRS and GSM objects (tab
General
).
Enable/disable generation
of an event message
Event name
Event code
Receiver event E762
GPRS connection lost
will happen if no signal is
received via GPRS įvyks for time T:
T = GPRS PING interval x GPRS
Multiplier
+
Tolerance
Receiver event R752
GSM connection restored
will happen if no
signal is received via SMS for time T:
T = SMS PING interval x GSM
Multiplier
+
Tolerance
Receiver event R762
GPRS connection restored
will happen if N
signals will be received via GPRS in time T:
T = GPRS PING interval x GPRS
Multiplier
Receiver event R752
GSM connection restored
will happen if N
signals will be received via SMS in time T:
T = SMS PING interval x GSM
Multiplier
Receiver event E704
Massive Communication loss
will happen if connection
with N objects will be lost at at the same time, e.g. for 1 second.
Receiver event R764
Massive GPRS communication restore
will happen if GPRS
connection with N objects is restored at the same time, e.g. for 1 second.
Receiver event R754
Massive GSM restore
will happen if GSM connection with
N objects is restored at the same time, e.g. for 1 second.
