User Manual v151003
Multichannel receiver RM14
15
Output parameters for sending messages to the monitoring software:
Name – specify port name
Output type – specify connection type with the monitoring software: TCP or COM
IP – specify monitoring stations IP address
Port / COM port – specify output port number
Heartbeat enabled – enable polling with the monitoring software
Heartbeat interval – specify the period for polling
Mode – specify the protocol of messages
Identificator – specify the identification number for the channel. It will allow to identify the channel upon losing
the connection with it.
Buffer size – specify the message buffer size
Enable – enables the created channel to function.
J.
Message filtering (tab
Filter
).
IP address to which all received messages are additionally directed may be set in tab
Filter
.
IP address and port number to which all received messages will be sent are entered in field
Raw
data
. Messages will be sent to the specified IP address without processing when box [Started] is ticked.
Messages will be changed according to protocol Contact ID if box [Standard messages] is ticked.
Message filtering parameters are set in field
Filter settings
. Click
Add filter
to open tab
Filter
settings
. Specify the rules for message transmission to the message monitoring software:
Enter the network number in box
Network
. Only those messages with matching receiver number
and network number will be filtered;
Enter tolerance time for the same signal (or repeated tolerance signals) in box
Time
;
Enter the receiver number displayed in the processed message in box
Receiver no
;
Enter the receiver line number displayed in the processed message in box
Line no
;
Check box
Convert
in order to change the structure of filtered messages;
Check box
Tunneling
to keep the structure of filtered messages;
Enter special event codes used to ignore messages re-transmitted in RAS-2M system in box
Events
one per line
;
Click OK to confirm entered values;
Several different filters may be set up and used.
