Trikdis RF-HW, Руководство пользователя

Страница: 9 / 11

www.trikdis.com 9 September, 2022
Security control panel „FLEXi“ SP3
All wireless keyfobs can be linked simultaneously.
When enrolling keyfob, the RF-HW module must be
at least 1 m from the keyfob.
1. The “ LEARN” LED on the RF-HW module will
flash.
2. RF-HW module - switches to learning mode.
TrikdisConfig will open the sensor binding
window.
3. Press and hold any button on the keyfob for a few
seconds. Release the button. On the RF-HW
module, the “ LEARN ” LED will flash yellow for a
short time (this indicates that the keyfob is
enrolled). A new window will open in
TrikdisConfig , in which you need to specify the
device type “ Keyfob ”.
4. Click “ Save ”.
5. In the “ Area ” field, specify the partition of the
security system that the keyfob will control (Arm
/ Disarm). In the “
User ” field, enter the user
number to which the keyfob will be assigned.
6. Click “ Save ”.
7. Wireless keyfob is included in the list.
8. The “ UID ” number must match the serial number
of the keyfob, which is indicated on the sticker on
the back of the keyfob.
9. If you need to add the next keyfob, you need
press and hold any button on the keyfob for a
few seconds. Release the button. And make the
settings described above.
10. Click “ Stop learning ” to complete the registration
of wireless keyfobs.