Trikdis RF-HW, Руководство пользователя

Страница: 8 / 11

www.trikdis.com 8 September, 2022
Security control panel „FLEXi“ SP3
11. Click “ Yes ” for the sensors to be written to the
“ FLEXi ” SP3 control panel.
Wait a few minutes. Click Read [F4].
TrikdisConfig will display a list of registered wireless sensors in the “ Wireless ” window. The “ Serial No. ” field will list the serial
number that must match the sensor serial number written on the back of the case or on the sensor board.
Check that the sensors are correctly assigned to the “ Zones” and “ Areas ” of the control panel (“ Zones ” window).
If you set zone “Type” EOL-T, then the sensor tamper monitoring mode will be enabled.
Note: To delete wireless sensors from the “ FLEXi ” SP3 ’s memory:
1. Launch TrikdisConfig .
2. Connect the „FLEXi“ SP3 to a computer using a USB Mini-B cable or connect to the „FLEXi“ SP3 remotely.
Click the Read [F4] button.
3. In the TrikdisConfig window “ Wireless ”, in the column “ Device type ”, select “ Disabled ” instead of the
“ Wireless sensor ” that you wish to delete and click Write [F5] . The wireless sensor is now removed from
the “ FLEXi ” SP3 ’s memory.
3 Linking a wireless remote controller (keyfob)
Click “ Learn sensors ”.